White Carbon Drying Machine
Basic Info
Model No.: LPG
Product Description
white Carbon Drying Machine
Main Introduction
LPG spray drying machine (White Carbon Drier) is a wide applied process in liquid process shaping and drying industry. This kind of White Carbon Dryer Machine has quick drying speed. Particularly .
LPG series high speed centrifugal spray dryer ( White Carbon Drying Equipment) consists of liquid transfer system, air filter system and heating system, liquid atomizing, drying tower, air exhausting and material collecting, control system and so on, the feature for each system as bellow:
1.Air filtering system and heating system
Before the fresh air enter into the heater, it should pass through the Pre&post filter first, and then enter the heater for heating. For the heating method, there are electrical heater or steam radiator, gas furnace and so on. Which method to choose depends on the customer site conditions. To ensure the drying medium enter into the drying chamber with high purity, the heated air should go through the high temperature high efficiency filter (HEPA-Optional) before enters the drying chamber.
2. Liquid transfer system
The liquid delivery system consists of liquid tank, pump and so on as to ensure the liquid enter into the atomizer smoothly.
3. Atomizing system
The atomizing system consists of high speed centrifugal atomizer with inverter and so on.
The powder from the high speed centrifugal atomizer is between 40-120 microns.
4. Drying tower system
The drying chamber consists of the spiral shell, hot air distributor, main tower and relevant fittings.
The Spiral shell and hot air distributor: the spiral shell and hot air distributor at the top of tower and it can regulate air flow rotation angle according to the specific condition to guide the air flow inside the tower effectively and avoid the material stick on the wall.in the middle there is the position for installing the atomizer..
Drying tower: The inner wall is SUS mirror sheet, ad welded by the arc welding. The insulation layer is rock wool
The middle of tower have the manhole to view and be convenient to clean and maintain the tower. For thetower body cross interface, pipe elbow are arc butt design, reduce dead angle; sealed type.
The main tower is equipped with air hammer, controlled by the pulse, and hitting the main drying tower timely as to avoid the dust stick on the wall
5. Air exhausting and product collecting system
For the material collecting system, there are several types. Such as cyclone, cyclone + bag filter, cyclone+ bag filter +water scrubber and so on. The method is depending on the material property itself. For the filtering system for the outlet air, we have filter on request.
6. Control system
HMI+PLC, each parameter can be displayed on the touch screen. Every parameter can be controlled and recorded easily. but it also can use button to reduce client investment.
Product Features:
1. The drying speed is high when the material liquid is atomized, In the hot-air flow,95%-98% of water can be evaporated at a moment .The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials.
2. The final products have good uniformity, flow ability & solubility. And the final products are high in purity and good in quality.
3. The production procedures are simple and easy operation and control. The moisture of liquid contents of 40-60% (for special materials, the contents might be up to 90%).can be dried into the powder or particle products once a time.
4. After the drying process, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity.
5. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and management.
White Carbon Drying Machine Parameter:
The Main technical parameters is for reference. We also produce and design product according to customers' requirment:
| Spray Drying Equipment | LPG-5 | LPG-25 | LPG-50 | LPG-100 | LPG-150 | LPG(200-11000) |
| Max evaporation(kg/h) | 5 | 25 | 50 | 100 | 150 | 200-11000 |
| Inlet temp(ºC) | ≤350 | ≤350 | ≤350 | ≤350 | ≤350 | ≤350 |
| Outlet temp(ºC) | ≤90 | ≤90 | ≤90 | ≤90 | ≤90 | ≤90 |
| Driving type of centrifugal sparyer | drived by compressedair | machanincal drive | ||||
| Rotation speed(r.p.m) | 25000 | 22000 | 21500 | 18000 | 18000 | 8820-15000 |
| Dia.of spray pallet | 50 | 102 | 108 | 108 | 150 | 180-340 |
| Dimension(m) | 1.8*0.93*2.2 | 3*2.7*4.26 | 3.7*3.2*5.1 | 4.6*4.2*6 | 5.5*4.5*7 | design acording to actual conditions |
| Powder recollection(%) | 95-99 | 95-99 | ||||
About hywell
Hywell are medicine ,food and chemical machinery manufacturer that from china, we are professional design and manufacture the drying machine, mixing machine ,and granulator machine ,grinding machine and so on that start from 2009. we approved the CE,ISO,GMP .
Hywell ensures you to the best quality services at all times. Shall you need any further information, please do not hesitate to contact undersigned.
Product Categories : Drying Machine > Centrifugal Spray Drying Machine